Which of the following is the correct relationship between base and emitter current of a BJT?

Related MCQs

• The base current for a BJT remains constant at 5mA, the collector current changes from 0.2mA to 0.3 mA and beta was changed from 100 to 110, then calculate the value of S.
• For the BJT, β=∞, VBEon=0.7V VCEsat=0.7V. The switch is initially closed. At t=0, it is opened. At which time the BJT leaves the active region?
• For a n-p-n transistor, the collector current changed from 0.2mA to 0.22mA resulting a change of base emitter voltage from 0.8v to 0.8005V. What is the value of Stability factor?
• During high frequency applications of a B.J.T., which parasitic capacitors arise between the base and the emitter?
• If the total capacitance between the base and the emitter increases by a factor of 2, the transit frequency                      
• Given hfe = 60, hie=1000Ω, hoe = 20μ Ω–, hre = 2 * 10-4. Find the current gain of the BJT, correct up to two decimal points.
• Given that transition capacitance is 5 pico F and diffusion capacitance is 80 pico F, and base emitter dynamic resistance is 1500 Ω, find the β cut-off frequency.
• From the given circuit, using silicon BJT, what is the value of the saturation collector current?
• In the given circuit using a silicon BJT, what is the value of saturation collector current?
• Consider a Darlington amplifier. In the self bias network, the biasing resistances are 220kΩ and 400 kΩ. What can be the correct value of input resistance if hfe=50 and emitter resistance = 10kΩ.