Consider the following circuit. Given that VDD = 15V, VP = 2V, and IDS = 3mA, to bias the circuit properly, select the proper statement.

Related MCQs

• Consider the circuit shown. VDS=3 V. If IDS=2mA, find VDD to bias circuit.
• For a fixed bias circuit having Ic = 0.3mA and In=0.0003mA, S is
• Consider the following circuit. Process transconductance parameter = 0.50 mA/V2, W/L=1, Threshold voltage = 3V, VDD = 20V. Find the operating point of circuit.
• For a fixed bias circuit the drain current was 1mA, VDD=12V, determine drain resistance required if VDS=10V?
• For a self-bias circuit, find drain to source voltage if VDD=12V, ID=1mA, Rs=RD=1KΩ?
• Consider the following circuit. IDSS = 2mA, VDD = 30V. Find R, given that VP = – 2V.
• 7 BIASING BJT SWITCHING CIRCUITSJFET - DC LOAD LINE AND BIAS POINT, VARIOUS BIASING METHODS OF JFET - JFET BIAS CIRCUIT DESIGN
• In a Single Input Balanced Output Differential amplifier, given VCC=15v, RE = 3.9kΩ, VCE=2.4 v and re=250Ω. Determine Voltage gain
• Increase in collector emitter voltage from 5V to 8V causes increase in collector current from 5mA to 5.3mA. Determine the dynamic output resistance.
• Find the gate to source voltage for voltage divider having R1=R2=2KΩ and VDD=12V, ID=1mA and RS=4KΩ?