McqMate

Q. |
## Consider the following circuit. Process transconductance parameter = 0.50 mA/V2, W/L=1, Threshold voltage = 3V, VDD = 20V. Find the operating point of circuit. |

A. | 20v, 25ma |

B. | 13v, 22ma |

C. | 12.72v, 23.61ma |

D. | 20v, 23.61ma |

Answer» C. 12.72v, 23.61ma | |

Explanation: ids = [k’w/l(vgs – vt)2]/2 vgs = 20 x 35 / 55 = 12.72 v |

4k

0

Do you find this helpful?

28

View all MCQs in

Electronic Circuits 1No comments yet

- Consider the circuit shown. VDS=3 V. If IDS=2mA, find VDD to bias circuit.
- Find the gate voltage for voltage divider having R1=R2=1KΩ and VDD=5V?
- Find the gate to source voltage for voltage divider having R1=R2=2KΩ and VDD=12V, ID=1mA and RS=4KΩ?
- Process transconductance parameter is 40μA/V2. Find drain to source current in saturation.
- Consider the following circuit. Given that VDD = 15V, VP = 2V, and IDS = 3mA, to bias the circuit properly, select the proper statement.
- Consider the following circuit. IDSS = 2mA, VDD = 30V. Find R, given that VP = – 2V.
- For a self-bias circuit, find drain to source voltage if VDD=12V, ID=1mA, Rs=RD=1KΩ?
- If source resistance in an amplifier circuit is zero, then voltage gain (output to input voltage ratio) and source voltage gain (output to source voltage ratio) are the same.
- What is the current flowing through the R1 resistor for voltage divider (R1=R2=1KΩ, VDD=10V)?
- If peak voltage for a half wave rectifier circuit is 5V and diode cut in voltage is 0.7, then peak inverse voltage on diode will be?