[Solved] The inputs to the differential amplifier are applied at

McqMate

Q.	The inputs to the differential amplifier are applied at
A.	at x and y
B.	at the gates of m1 and m2
C.	all of the mentioned
D.	none of the mentioned
Answer» B. at the gates of m1 and m2
Explanation: none.

1.4k

0

Do you find this helpful?

11

View all MCQs in

Electronic Circuits 1

Discussion

No comments yet

Related MCQs

In ideal Differential Amplifier, if same signal is given to both inputs, then output will be
A Differential Amplifier should have collector resistor’s value (RC1 & RC2) as
A Differential Amplifier amplifies
If output is measured between two collectors of transistors, then the Differential amplifier with two input signal is said to be configured as
A differential amplifier is capable of amplifying
Find IC, given VCE=0.77v, VCC=10v, VBE=0.37v and RC=2.4kΩ in Dual Input Balanced Output differential amplifier
Obtain the collector voltage, for collector resistor (RC) =5.6kΩ, IE=1.664mA and VCC=10v for single input unbalanced output differential amplifier
In a Single Input Balanced Output Differential amplifier, given VCC=15v, RE = 3.9kΩ, VCE=2.4 v and re=250Ω. Determine Voltage gain
The Differential output of the difference amplifier is the amplification of
In Common Mode Differential Amplifier, the outputs Vout1 and Vout2 are related as: