If the transconductance of the B.J.T increases, the transit frequency              

Related MCQs

• For the BJT, β=∞, VBEon=0.7V VCEsat=0.7V. The switch is initially closed. At t=0, it is opened. At which time the BJT leaves the active region?
• If the total capacitance between the base and the emitter increases by a factor of 2, the transit frequency                      
• 3 BJT FREQUENCY RESPONSE
• Gain bandwidth frequency is GBP= 3000 Mhz. The cut-off frequency is f=10Mhz. What is the CE short circuit current gain at the β cutoff frequency?
• Find the 3-dB frequency given that the gain of RC coupled amplifier is 150, the low frequency voltage gain is 100 and the input frequency is 50Hz.
• Process transconductance parameter is 40μA/V2. Find drain to source current in saturation.
• Consider the following circuit. Process transconductance parameter = 0.50 mA/V2, W/L=1, Threshold voltage = 3V, VDD = 20V. Find the operating point of circuit.
• The transconductance of a B.J.T.is 5mS (gm) while a 2KΩ (Rl) load resistance is connected to the C.E. stage. Neglecting Early effect, what is the Miller multiplication factor for the input side?
• 1, α2 = 1.5 what is the transconductance of the entire network?
• If a C.E. stage has a load Rl and transconductance gm, what is the factor by which the capacitance between the base and the collector at the input side gets multiplied?