The stress in the wall of a thin cylinder subjected to internal pressure, is

Related Questions

• For the buildings having a low permeability, the internal wind pressure acting normal to the wall and roof surfaces is taken as (Where p is basic wind pressure)
• The safe working pressure for a spherical vessel 1.5 m diameter and having 1.5 cm thick wall not to exceed tensile stress 50kg/cm2, is
• If fbt and fc are the co-existent bending tensile stress and shear stress in a member, the equivalent stress fc is
• In factory buildings, the horizontal beams spanning between the wall columns supporting a wall covering, are called
• In factory buildings, the horizontal beams spanning between the wall columns supporting a wall covering, are called
• A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed
• The permissible stress to which a structural member can be subjected to, is known as
• A structural member subjected to compressive stress in a direction parallel to its longitudinal axis, is generally known as
• A tension member, if subjected to possible reversal of stress due to wind, the slenderness ratio of the member should not exceed
• A structural member subjected to compressive stress in a direction parallel to its longitudinal axis, is generally known as