As compared to field rivets, the shop rivets are

Related MCQs

• If N is the number of rivets in the joint, the strength of a riveted joint against shearing of rivets, is given by
• The rivets which are heated and then driven in the field, are known
• Rivets connecting flange angles to cover plates in a plate girder are subjected to
• In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is
• Cold driven rivets range from
• When plates are exposed to weather, tacking rivets are provided at a pitch in line not exceeding (where t is the thickness of the outside plate).
• Pitch of tacking rivets, when double angles connected back to back and acting as tension members should not be more than
• For rivets in tension with countersunk heads, the tensile value shall be
• If the thickness of thinnest outside plate is 10 mm, then the maximum pitch of rivets in tension will be taken as
• The strength of ISA 125 = 75 × 10 mm used as a tie member with its longer leg connected at the ends by 27 mm diameter rivets, is