- Civil Engineering
- Design of Steel Structures
- If N is the number of rivets in the join...

Q. |
## If N is the number of rivets in the joint, the strength of a riveted joint against shearing of rivets, is given by |

A. | Ps = N d2 × Ps |

B. | Ps = N × (d × t × ps) |

C. | Ps = N × (p - d) × t × Ps |

D. | Ps = N × (P + d) × t × ps |

Answer» A. Ps = N d2 × Ps |

View all MCQs in:
Design of Steel Structures

- If p and d are pitch and gross diameter of rivets, the efficiency ( ) of the riveted joint, is given by
- The ratio of shearing stress to shearing strain within elastic limit, is known as
- Strengths of a rivet in single shearing, in bearing and in tearing are 3425 kg, 4575 kg and 5025 kg respectively. If the load in the member is 35 tonnes, the number of rivets required, is
- Strengths of a rivet in single shearing, in bearing and in tearing are 3425 kg, 4575 kg and 5025 kg respectively. If the load in the member is 35 tonnes, the number of rivets required, is
- If the pitch is 6 cm and rivet value is 4 tonnes, the number of rivets required for a riveted connection carrying an eccentric load of 15 tonnes at a distance of 30 cm from the centre line, is
- If the pitch is 6 cm and rivet value is 4 tonnes, the number of rivets required for a riveted connection carrying an eccentric load of 15 tonnes at a distance of 30 cm from the centre line, is
- The strength of a riveted lap joint is equal to its
- As compared to field rivets, the shop rivets are
- Design of a riveted joint is based on the assumption:
- Efficiency of a riveted joint is defined as the ratio of

Login to Continue

It will take less than 2 minutes

Report MCQ