McqMate

Q. |
## Bearing stiffener in a plate girder is used to |

A. | transfer the load from the top flange to the bottom one |

B. | prevent buckling of web |

C. | decrease the effective depth of web |

D. | prevent excessive deflection |

Answer» B. prevent buckling of web |

2.9k

0

Do you find this helpful?

48

View all MCQs in

Design of Steel StructuresNo comments yet

- If R is the reaction on the bearing plate, the minimum moment of. inertia of the bearing stiffener provided at the support of a plate girder of overall depth D, the maximum thickness of the compression flange T, carrying total load W, is
- When the depth of a plate girder is at least times the depth of vertical leg of the flange angles, the girder is known as deep plate girder, if is
- When the depth of a plate girder is at least times the depth of vertical leg of the flange angles, the girder is known as deep plate girder, if is
- Bearing stiffener in a plate girder is used to
- The thickness of the web of a mild steel plate girder is less than d/200. If only one horizontal stiffener is used, it is placed at
- The thickness of the web of a mild steel plate girder is less than d/200. If only one horizontal stiffener is used, it is placed at
- Horizontal stiffener in a plate girder is provided to safeguard against
- If W and L are the total superimposed load and the span of a plate girder in metres, the approximate self weight (W) of the girder, is taken as
- If W and L are the total superimposed load and the span of a plate girder in metres, the approximate self weight (W) of the girder, is taken as
- A second horizontal stiffener is always placed at the neutral axis of the girder if the thickness of the web is less than