- Civil Engineering
- Design of Steel Structures
- If p and d are pitch and gross diameter ...

Q. |
## If p and d are pitch and gross diameter of rivets, the efficiency ( ) of the riveted joint, is given by |

A. | = p/p - d |

B. | = p/p + d |

C. | = p - d/p |

D. | = p + d/p |

Answer» C. = p - d/p |

View all MCQs in:
Design of Steel Structures

- If N is the number of rivets in the joint, the strength of a riveted joint against shearing of rivets, is given by
- The difference between gross diameter and nominal diameter for the rivets up to 25 mm diameter is
- The difference between gross diameter and nominal diameter for the rivets up to 25 mm diameter is
- Minimum pitch of the rivets shall not be less than (Where d is gross diameter of rivet)
- Efficiency of a riveted joint, having the minimum pitch as per IS : 800, is
- If the pitch is 6 cm and rivet value is 4 tonnes, the number of rivets required for a riveted connection carrying an eccentric load of 15 tonnes at a distance of 30 cm from the centre line, is
- If the pitch is 6 cm and rivet value is 4 tonnes, the number of rivets required for a riveted connection carrying an eccentric load of 15 tonnes at a distance of 30 cm from the centre line, is
- In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is
- In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is
- Efficiency of a riveted joint is defined as the ratio of

Login to Continue

It will take less than 2 minutes

Report MCQ