A slope based on the culvert bottom is called----

Related MCQs

• calculate the frictional slope of a triangular channel having depth 2.5m and side slope of 1H:2V. If the rate of change of specific energy is 1.6 x10-5m/s, If V= 1.57 m/s.
• A tank of uniform cross-sectional area (A) containing liquid upto height (H1) has an orifice of cross-sectional area (a) at its bottom. The time required to empty the tank completely will be
• An open tank contains 1 m deep water with 50 cm depth of oil of specific gravity 0.8 above it. The intensity of pressure at the bottom of tank will be
• A vertical rectangular plane surface is submerged in water such that its top and bottom surfaces are 1.5 m and 6.0 m res-pectively below the free surface. The position of center of pressure below the free surface will be at a distance of
• A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the center of bottom is
• The flow of water through the hole in the bottom of a wash basin is an example of
• The discharge through a wholly drowned orifice is given by (where H1 = Height of water (on the upstream side) above the top of the orifice, H2 = Height of water (on the downstream side) above the bottom of the orifice, and H = Difference between two water levels on either side of the orifice)
• The most economical section is one for which a given cross sectional area, the slope of the bed (s) and coefficient of resistance has
• Calculate the value of rate of change of specific energy for a triangular channel having depth 3.5m and the side slope is 1H:2V. Given: V=2.5m/s, dy/dx= 8.6x10-4
• Calculate the value of Sf for trapezoidal channel having depth 2m, width 5m and side slope of 1H:1.5V. Given: dy/dx= 1.18x10-3, S0= 1 in 1000, C= 50.