McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Electrical Engineering .
Chapters
| 1. |
Tesla is a unit of |
| A. | field strength |
| B. | inductance |
| C. | flux density |
| D. | flux |
| Answer» C. flux density | |
| 2. |
A permeable substance is one |
| A. | which is a good conductor |
| B. | which is a bad conductor |
| C. | which is a strong magnet |
| D. | through which the magnetic lines of force can pass very easily |
| Answer» D. through which the magnetic lines of force can pass very easily | |
| 3. |
The materials having low retentivity are suitable for making |
| A. | weak magnets |
| B. | temporary magnets |
| C. | permanent magnets |
| D. | none of the above |
| Answer» B. temporary magnets | |
| 4. |
A magnetic field exists around |
| A. | iron |
| B. | copper |
| C. | aluminium |
| D. | moving charges |
| Answer» D. moving charges | |
| 5. |
Ferrites are materials. |
| A. | paramagnetic |
| B. | diamagnetic |
| C. | ferromagnetic |
| D. | none of the above |
| Answer» C. ferromagnetic | |
| 6. |
Air gap has_______eluctance as compared to iron or steel path |
| A. | little |
| B. | lower |
| C. | higher |
| D. | zero |
| Answer» B. lower | |
| 7. |
The direction of magnetic lines of force is |
| A. | from south pole to north pole |
| B. | from north pole to south pole |
| C. | from one end of the magnet to another |
| D. | none of the above |
| Answer» B. from north pole to south pole | |
| 8. |
Which of the following is a vector quantity ? |
| A. | Relative permeability |
| B. | Magnetic field intensity |
| C. | Flux density |
| D. | Magnetic potential |
| Answer» B. Magnetic field intensity | |
| 9. |
The two conductors of a transmission line carry equal current I in opposite directions. The force on each conductor is |
| A. | proportional to 7 |
| B. | proportional to X |
| C. | proportional to distance between the conductors |
| D. | inversely proportional to I |
| Answer» B. proportional to X | |
| 10. |
A material which is slightly repelled by a magnetic field is known as |
| A. | ferromagnetic material |
| B. | diamagnetic material |
| C. | paramag>etic material |
| D. | conducting material |
| Answer» B. diamagnetic material | |
| 11. |
When an iron piece is placed in a magnetic field |
| A. | the magnetic lines of force will bend away from their usual paths in order to go away from the piece |
| B. | the magnetic lines of force will bend away from their usual paths in order to pass through the piece |
| C. | the magnetic field will not be affected |
| D. | the iron piece will break |
| Answer» B. the magnetic lines of force will bend away from their usual paths in order to pass through the piece | |
| 12. |
Fleming's left hand rule is used to find |
| A. | direction of magnetic field due to current carrying conductor |
| B. | direction of flux in a solenoid |
| C. | direction of force on a current car¬rying conductor in a magnetic field |
| D. | polarity of a magnetic pole |
| Answer» C. direction of force on a current car¬rying conductor in a magnetic field | |
| 13. |
The ratio of intensity of magnetisation to the magnetisation force is known as |
| A. | flux density |
| B. | susceptibility |
| C. | relative permeability |
| D. | none of the above |
| Answer» B. susceptibility | |
| 14. |
Magnetising steel is normals difficult because |
| A. | it corrodes easily |
| B. | it has high permeability |
| C. | it has high specific gravity |
| D. | it has low permeability |
| Answer» D. it has low permeability | |
| 15. |
The left hand rule correlates to |
| A. | current, induced e.m.f. and direc¬tion of force on a conductor |
| B. | magnetic field, electric field and direction of force on a conductor |
| C. | self induction, mutual induction and direction of force on a conductor |
| D. | current, magnetic field and direc¬tion of force on a conductor |
| Answer» D. current, magnetic field and direc¬tion of force on a conductor | |
| 16. |
The unit of relative permeability is |
| A. | henry/metre |
| B. | henry |
| C. | henry/sq. m |
| D. | it is dimensionless |
| Answer» D. it is dimensionless | |
| 17. |
A conductor of length L has current I passing through it, when it is placed parallel to a magnetic field. The force experienced by the conductor will be |
| A. | zero |
| B. | BLI |
| C. | B2LI |
| D. | BLI2 |
| Answer» A. zero | |
| 18. |
The force between two long parallel conductors is inversely proportional to |
| A. | radius of conductors |
| B. | current in one conductor |
| C. | product of current in two conduc¬tors |
| D. | distance between the conductors |
| Answer» D. distance between the conductors | |
| 19. |
Materials subjected to rapid reversal of magnetism should have |
| A. | large area oiB-H loop |
| B. | high permeability and low hysteresis loss |
| C. | high co-ercivity and high reten-tivity |
| D. | high co-ercivity and low density |
| Answer» B. high permeability and low hysteresis loss | |
| 20. |
Indicate which of the following material does not retain magnetism permanently. |
| A. | Soft iron |
| B. | Stainless steel |
| C. | Hardened steel |
| D. | None of the above |
| Answer» A. Soft iron | |
| 21. |
The main constituent of permalloy is |
| A. | cobalt |
| B. | chromium |
| C. | nickel |
| D. | tungsten |
| Answer» C. nickel | |
| 22. |
The use of permanent magnets is. not made in |
| A. | magnetoes |
| B. | energy meters |
| C. | transformers |
| D. | loud-speakers |
| Answer» C. transformers | |
| 23. |
Paramagnetic materials have relative permeability |
| A. | slightly less than uuity |
| B. | equal to unity |
| C. | slightly more than unity |
| D. | equal to that ferromagnetic mate rials |
| Answer» C. slightly more than unity | |
| 24. |
Substances which have permeability less than the permeability of free space are known as |
| A. | ferromagnetic |
| B. | paramagnetic |
| C. | diamagnetic |
| D. | bipolar |
| Answer» C. diamagnetic | |
| 25. |
Two infinitely long parallel conductors in vacuum anf' separated 1 metre between centres >rhen a current of 1 ampere flows thn. ugh each conductor, produce on each otLer a force of |
| A. | 2 x 1(T2 N/m) |
| B. | 2 x KT3 N/m |
| C. | 2 x 10"5 N/m |
| D. | 2x 1(T7 N/m) |
| Answer» D. 2x 1(T7 N/m) | |
| 26. |
In the left hand rule, forefinger always represents |
| A. | voltage |
| B. | current |
| C. | magnetic field |
| D. | direction of force on the conductor |
| Answer» C. magnetic field | |
| 27. |
Which of the following is a ferromagnetic material ? |
| A. | Tungsten |
| B. | Aluminium |
| C. | Copper |
| D. | Nickel |
| Answer» D. Nickel | |
| 28. |
Ferrites are a sub-group of |
| A. | non-magnetic materials |
| B. | ferro-magnetic materials |
| C. | paramagnetic materials |
| D. | ferri-magnetic materials |
| Answer» D. ferri-magnetic materials | |
| 29. |
Gilbert is a unit of |
| A. | electromotive force |
| B. | magnetomotive force |
| C. | conductance |
| D. | permittivity |
| Answer» B. magnetomotive force | |
| 30. |
The working of a meter is based on the use of a permanent magnet. In order to protect the meter functioning from stray magnetic fields |
| A. | meter is surrounded by strong magnetic fields |
| B. | a soft iron shielding is used |
| C. | a plastic shielding is provided |
| D. | a shielding of anon-magnetic material is used |
| Answer» B. a soft iron shielding is used | |
| 31. |
Reciprocal of permeability is |
| A. | reluctivity |
| B. | susceptibility |
| C. | permittivity |
| D. | conductance |
| Answer» A. reluctivity | |
| 32. |
The relative permeability is less than unity is case of |
| A. | ferromagnetic materials |
| B. | ferrites |
| C. | non-ferrous materials |
| D. | diamagnetic materials |
| Answer» D. diamagnetic materials | |
| 33. |
Which of the following is the unit of magnetic flux density ? |
| A. | weber |
| B. | lumens |
| C. | tesla |
| D. | none of the above |
| Answer» C. tesla | |
| 34. |
The magnetism left in the iron after exciting field has been removed is known as |
| A. | permeance |
| B. | residual magnetism |
| C. | susceptance |
| D. | reluctance |
| Answer» B. residual magnetism | |
| 35. |
Which of the following is not a unit of flux? |
| A. | Maxwell |
| B. | Telsa |
| C. | Weber |
| D. | All of the above |
| Answer» B. Telsa | |
| 36. |
Which of the following is expected to have the maximum permeability ? |
| A. | Brass |
| B. | Copper |
| C. | Zinc |
| D. | Ebonite |
| Answer» D. Ebonite | |
| 37. |
One telsa is equal to |
| A. | 1 Wb/mm2 |
| B. | 1 Wb/m |
| C. | 1 Wb/m2 |
| D. | 1 mWb/m2 |
| Answer» C. 1 Wb/m2 | |
| 38. |
Out of the following statements, concerning an electric field, which statement is not true ? |
| A. | The electric intensity is a vector quantity |
| B. | The electric field intensity at a point is numerically equal to the force exerted upon a charge placed at that point |
| C. | An electric field is defined as a point in space at which an electric charge would experienc* a force |
| D. | Unit field intensity in the exertion of a force of one newton on a charge of one coulomb |
| Answer» B. The electric field intensity at a point is numerically equal to the force exerted upon a charge placed at that point | |
| 39. |
When a magnet is in motion relative to a coil the induced e.m.f. does not depend upon |
| A. | resistance of the coil |
| B. | motion of the magnet |
| C. | number of turns of the coil |
| D. | pole strength of the magnet |
| Answer» A. resistance of the coil | |
| 40. |
One maxwell is equal to |
| A. | 10 webers |
| B. | 10 webers |
| C. | 10 webers |
| D. | 10 webers |
| Answer» D. 10 webers | |
| 41. |
When two ends of a circular uniform wire are joined to the terminals of a battery, the field at the centre of the circle |
| A. | will be zero |
| B. | will be infinite |
| C. | will depend on the amount of e.m.f. applied |
| D. | will depend on the radius of the circle |
| Answer» D. will depend on the radius of the circle | |
| 42. |
Susceptibility is positive for |
| A. | non-magnetic substances |
| B. | diamagnetic substances |
| C. | ferromagnetic substances |
| D. | none of the above |
| Answer» C. ferromagnetic substances | |
| 43. |
Two long parallel conductors carry 100 A. If the conductors are separated by 20 mm, the force per metre of length of each conductor will be |
| A. | 100 N |
| B. | 10 N |
| C. | 1 N |
| D. | 0.1 N |
| Answer» D. 0.1 N | |
| 44. |
A 300 mm long conductor is carrying a current of 10 A and is situated at right angles to a magnetic field having a flux density of 0.8 T ; the force on the conductor will be |
| A. | 240 N |
| B. | 24 N |
| C. | 2.4 N |
| D. | 0.24 N |
| Answer» C. 2.4 N | |
| 45. |
The electromagnet has 50 turns and a current of 1A flows through the coil. If the length of the magnet circuit is 200 mm, what is the magnetic field strength ? |
| A. | 2500 AT/m |
| B. | 250 AT/m |
| C. | 25 AT/m |
| D. | 2.5 AT/m |
| Answer» B. 250 AT/m | |
| 46. |
What is the magnitude and the direction of force per 1.1m length of a pair of conductors of a direct current linecarrying 10 amperes and spaced 100 mm apart ? |
| A. | 22 x 10"8 N |
| B. | 22 x 10"7 N |
| C. | 22 x 10-6 N |
| D. | 22 x 10"5 N |
| Answer» D. 22 x 10"5 N | |
| 47. |
A square cross-sectional magnet has a pole strength of 1 x 10 Wb and cross sectional area of 20 mm x 20 mm. What is the strength at a distance of 100 mm from the unit pole in air ? |
| A. | 63.38 N/Wb |
| B. | 633.8 N/Wb |
| C. | 6338 N/Wb |
| D. | 63380 N/Wb |
| Answer» C. 6338 N/Wb | |
| 48. |
The unit of flux is the same as that of |
| A. | reluctance |
| B. | resistance |
| C. | permeance |
| D. | pole strength |
| Answer» D. pole strength | |
| 49. |
Unit for quantity of electricity is |
| A. | ampere-hour |
| B. | watt |
| C. | joule |
| D. | coulomb |
| Answer» D. coulomb | |
| 50. |
The Biot-savart's law is a general modification of |
| A. | Kirchhoffs law |
| B. | Lenz's law |
| C. | Ampere's law |
| D. | Faraday's laws |
| Answer» C. Ampere's law | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.