McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Bachelor of Fashion Technology (BFT) .
| 51. |
A ---------------- is a line where two or more fabrics are joined |
| A. | Flat lock |
| B. | Single lock stitch |
| C. | Seam |
| D. | Lock stitch |
| Answer» C. Seam | |
| 52. |
A ------------- consist of a series of stitches embodied in a material for ornamental purposes or finishing an edge |
| A. | Embroidery |
| B. | Overlocking |
| C. | Stitching |
| D. | Joining |
| Answer» C. Stitching | |
| 53. |
The space between the needles on the needle bar is also referred as -------------------------- |
| A. | Gauge |
| B. | Distance |
| C. | Width |
| D. | Depth |
| Answer» A. Gauge | |
| 54. |
The distance between the upper and lower surface of the stitch ------------- |
| A. | Stitch depth |
| B. | Stitch width |
| C. | Gauge |
| D. | Selvedge |
| Answer» A. Stitch depth | |
| 55. |
Expand GSM |
| A. | Gram per square metre |
| B. | Gross sales per month |
| C. | General system of manufacturing |
| D. | Gross sales margin |
| Answer» A. Gram per square metre | |
| 56. |
---------------- materials used to ornament or enhance garments |
| A. | Tickets |
| B. | Jags |
| C. | Jrims |
| D. | Embroidery |
| Answer» C. Jrims | |
| 57. |
------------------- is a device that hold a placket closed. |
| A. | Fastener |
| B. | Tags |
| C. | Labels |
| D. | Seams |
| Answer» A. Fastener | |
| 58. |
The fabric produced by tending and interlocking fibres are called as |
| A. | Nets |
| B. | Wovens |
| C. | Knifs |
| D. | Fibre webs |
| Answer» D. Fibre webs | |
| 59. |
Class 300 ---------------- |
| A. | Overedge stitch |
| B. | Lock stitch |
| C. | Chain stitch |
| D. | Hand stitch |
| Answer» B. Lock stitch | |
| 60. |
Chain stitch ---------- |
| A. | Class 100 |
| B. | Class 300 |
| C. | Class 200 |
| D. | Class 400 |
| Answer» A. Class 100 | |
| 61. |
Class 200 ---------- |
| A. | Hand stitch |
| B. | Lock stitch |
| C. | Overedge stitch |
| D. | Plain stitch |
| Answer» A. Hand stitch | |
| 62. |
Two thread chain stitch -------------------- |
| A. | 401 |
| B. | 400 |
| C. | 200 |
| D. | 100 |
| Answer» A. 401 | |
| 63. |
Over edge stitch ------------------ |
| A. | Class 500 |
| B. | Class 200 |
| C. | Class 300 |
| D. | Class 600 |
| Answer» A. Class 500 | |
| 64. |
----------------- is measured from the cut edge of fabric to the main line of stitches. |
| A. | Selvedge |
| B. | Seam allowance |
| C. | Seam |
| D. | Stitch length |
| Answer» B. Seam allowance | |
| 65. |
--------------------- class is formed by two or more pieces of fabric joined by overlapping at the needle. |
| A. | Superimposed seam |
| B. | Lapped seam |
| C. | Bound seam |
| D. | Seam |
| Answer» B. Lapped seam | |
| 66. |
---------------- are the firms that provide sewing or speciality services. |
| A. | Apparel firms |
| B. | Buyers |
| C. | Manufactures |
| D. | Contractors |
| Answer» D. Contractors | |
| 67. |
FS class ------------------ |
| A. | Flat seam |
| B. | Felt seam |
| C. | Functional seam |
| D. | Flaw seam |
| Answer» A. Flat seam | |
| 68. |
------------------ are designed to piece the fabric and create a hole so thread can be carried through the fabric. |
| A. | Needles |
| B. | Drillers |
| C. | Shears |
| D. | Knifes |
| Answer» A. Needles | |
| 69. |
------------- is the thick upper portion that fits into the needle bar. |
| A. | Shanks |
| B. | Blude |
| C. | Groove |
| D. | Scarf |
| Answer» A. Shanks | |
| 70. |
--------------- is the rippling of a seam that occurs just after sewing or after laundry |
| A. | Seam pucker |
| B. | Feed pucker |
| C. | Tension |
| D. | Pilling |
| Answer» A. Seam pucker | |
| 71. |
---------------- is the percentage of fabric utilization. |
| A. | Pattern making |
| B. | GSM |
| C. | Marker efficiency |
| D. | Marker |
| Answer» C. Marker efficiency | |
| 72. |
Cutting devices controlled by electronic microchips -------------- |
| A. | Stationary machines |
| B. | Sutemated cutting |
| C. | Die cutting |
| D. | Straight knife |
| Answer» B. Sutemated cutting | |
| 73. |
---------- occurs in woven fabrics when yarns slide together along other yarns or a line of stitching |
| A. | Yarn severance |
| B. | Seam slippage |
| C. | Skipped stitch |
| D. | Stitch breakage |
| Answer» B. Seam slippage | |
| 74. |
----------------- is the breakage of fabric yarns that occurs during stitching because of incompatibility of needle, fabric and sewing speed. |
| A. | Yarn severance |
| B. | Seam slippage |
| C. | Skipped stitch |
| D. | Distortion |
| Answer» A. Yarn severance | |
| 75. |
------------------ is the disruption of the fabric surface or the deformation of a garment |
| A. | Distortion |
| B. | Seam elasticity |
| C. | Slubs |
| D. | Seam grin |
| Answer» A. Distortion | |
| 76. |
Seam performance relates to the elasticity, flexibility and -------------- of a seam. |
| A. | Length |
| B. | Width |
| C. | Strength |
| D. | Weight |
| Answer» C. Strength | |
| 77. |
Elasticity involves two factors, --------------------and recovery. |
| A. | Elongation |
| B. | Strength |
| C. | Flexible |
| D. | Width |
| Answer» A. Elongation | |
| 78. |
The machine --------- is the metal form that provides the exterior shape of the machine. |
| A. | Bed type |
| B. | Casting |
| C. | Hooks |
| D. | Folders |
| Answer» B. Casting | |
| 79. |
The ------------------ is the lower surface of the machine under which the feed mechanisms and loopers are located. |
| A. | Bed |
| B. | Casting |
| C. | Speader |
| D. | Table |
| Answer» A. Bed | |
| 80. |
The ------------------- is the work surface of the machine on which the fabric rests while sewn |
| A. | Cloth plate |
| B. | Cylinder |
| C. | Ped type |
| Answer» A. Cloth plate | |
| 81. |
The most commonly used bed typed are flat, cylinder, post and ,---------------- |
| A. | Cloth plate |
| B. | Raised bed |
| C. | High bed |
| D. | Casted bed |
| Answer» B. Raised bed | |
| 82. |
--------------------- machines allow manipulation of fabric on both sides of the needle for topstitching and lapped seaming |
| A. | Flat bed |
| B. | Cylinder |
| C. | Post |
| D. | Raised bed |
| Answer» A. Flat bed | |
| 83. |
--------------- controls the positioning and movement, accuracy and consistency in positioning and stitching the fabric. |
| A. | Throat plate |
| B. | Thread guides |
| C. | Chain device |
| D. | Take tips |
| Answer» B. Thread guides | |
| 84. |
---------------- are designed to facilitate alignment, accuracy and consistency in positioning and stitching the fabric. |
| A. | Guides |
| B. | Top feeders |
| C. | Post |
| D. | Process foot |
| Answer» A. Guides | |
| 85. |
Gathering a fabric ---------------- |
| A. | Shirring |
| B. | Long stitch |
| C. | Puckering |
| D. | Seersucker |
| Answer» A. Shirring | |
| 86. |
------------------- is the fastest means of transferring heat into the fabrics. |
| A. | Heat |
| B. | Pressure |
| C. | Steam |
| D. | Current |
| Answer» C. Steam | |
| 87. |
The process of bending fabric layers by applying heat and pressure --------------- |
| A. | Binding |
| B. | Fusing |
| C. | Attaching |
| D. | Stitching |
| Answer» B. Fusing | |
| 88. |
Roller presses ------------------ |
| A. | Fusing device |
| B. | Stitching device |
| C. | Attaching device |
| D. | Bonding device |
| Answer» B. Stitching device | |
| 89. |
------------------------ occurs when the face fabric or interlining becomes purchased from delamination. |
| A. | Broadiness |
| B. | bubbling |
| C. | shrinkage |
| D. | fabric defects |
| Answer» B. bubbling | |
| 90. |
Attachments to a garment that provide numerical product information -------------- - |
| A. | tickets |
| B. | trims |
| C. | bundles |
| D. | terms |
| Answer» A. tickets | |
| 91. |
UPS ---------------- |
| A. | unit production system |
| B. | union publc survey |
| C. | uniqueness to product sale |
| D. | unit processing system |
| Answer» A. unit production system | |
| 92. |
Products that have minor changes ---------------- |
| A. | Fashion product |
| B. | Staple product |
| C. | Semi-style product |
| D. | Convenient product |
| Answer» B. Staple product | |
| 93. |
The uniformality with which each stitch is formed in a row of stitches ------------- |
| A. | Stitch width |
| B. | Stitch depth |
| C. | Stitch length |
| D. | Stitch consistency |
| Answer» D. Stitch consistency | |
| 94. |
A set of pattern pieces that form the simplest garment -------------- |
| A. | Basic clock |
| B. | Front & back |
| C. | Straight patterns |
| D. | Pattern sets |
| Answer» A. Basic clock | |
| 95. |
Device for holding lower thread ------------------- |
| A. | Bobbin |
| B. | Spreader |
| C. | Looper |
| D. | Needle |
| Answer» A. Bobbin | |
| 96. |
Cutting device in the shape of pieces to be cut |
| A. | Band knife |
| B. | Die |
| C. | Laser cutting |
| D. | Automatic |
| Answer» B. Die | |
| 97. |
Increase or decrease in size of a pattern |
| A. | Grading |
| B. | Cut and make |
| C. | Alteration |
| D. | Variation |
| Answer» A. Grading | |
| 98. |
Item for retail display not permanently attached to garment ---------------- |
| A. | Trim |
| B. | Lace |
| C. | fasteners |
| D. | hangtags |
| Answer» D. hangtags | |
| 99. |
permanently attached printed as woven items presenting brand names as required information. |
| A. | Labels |
| B. | Tags |
| C. | Tickets |
| D. | Slips |
| Answer» A. Labels | |
| 100. |
Focusing a powerful team of light on a minute area to cut fabric by vaporization. |
| A. | Laser cutting |
| B. | Water jet |
| C. | Automated |
| D. | Band knife |
| Answer» A. Laser cutting | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.