When the supply voltage for an induction motor is reduced by 10%, the maximum running torque will be

Related MCQs

• A 3 phase induction motor running with full load slip of 1.2% and its rotor impedance per phase on standstill is 0.016+j0.265Ω then the ratio of full load torque to maximum torque is
• A 3 phase induction motor is running with full load slip of 1.2% and its rotor impedance per phase is 0.06+j0.265Ω then ratio of starting torque to maximum torque is
• Condition for maximum torque developed during running by a three phase induction motor is
• Maximum torque during running condition developed by three phase induction motor can be obtained by changing rotor resistance
• A 4-pole, 3-phase induction motor is running at 4 percent slip at full load. If the speed of the motor is 720 rpm, the supply frequency is
• The armature torque of a DC motor running of 800rpm is 99.3Nm and shaft torque is 93.3Nm. The iron and friction losses are__.
• A 4 pole, 50Hz , 3 phase I M is running at 1425rpm on full load having rotor impedance per phase on standstill as 0.4+j2Ω. The ratio of full load torque to maximum torque is ___.
• Two of the supply terminals to a 3-phase induction motor get interchanged during reconnection after normal maintenance. When switched on to supply, the motor will
• If the applied voltage of dc motor is reduced to half with load torque doubled the armature current will be____
• The shaft torque in a DC motor is less than total armature torque because of ____in the motor