[Solved] In a singly reinforced beam

McqMate

Q.	In a singly reinforced beam
A.	Compression is borne entirely by concrete
B.	Steel possesses initial stresses when embedded in concrete
C.	Plane sections transverse to the centre line of the beam before bending remain plane after bending
D.	Elastic moduli for concrete and steel have different values within the limits of deformation of the beam
Answer» C. Plane sections transverse to the centre line of the beam before bending remain plane after bending

5k

0

Do you find this helpful?

27

View all MCQs in

Design of Reinforces Concrete Structures

Discussion

No comments yet

Related MCQs

In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called
In a singly reinforced beam, the effective depth is measured from its compression edge to
If the depth of actual neutral axis of a doubly reinforced beam
The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called
An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam
Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds
A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds Drop panel
A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis