A simply supported beam 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is

Related MCQs

• An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam
• For the design of a simply supported T-beam the ratio of the effective span to the overall depth of the beam is limited to
• For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed
• For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed
• For a simply supported beam of span 15 m, the minimum effective depth to satisfy the vertical deflection limits should be
• The pitch of the main bars in a simply supported slab, should not exceed its effective depth by
• In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called
• If depth of slab is 10 cm, width of web 30 cm, depth of web 50 cm, centre to centre distance of beams 3 m, effective span of beams 6 m, the effective flange width of the beam, is
• If ‘W’ is the uniformly distributed load on a circular slab of radius ‘R‘fixed at tsends, the maximum positive radial moment at its centre, is
• If the loading on a pre-stressed rectangular beam, is uniformly distributed, the tendon to be provided should be.