For achieving continuous flow through a system, no position of the pipe should be higher than

Related MCQs

• At point A in a pipe line carrying water the diameter is 1 m, the pressure 98 kPa and the velocity 1 m/s. At point B, 2 m higher than A, the diameter is 0.5 m and the pressure 20 kPa. The direction of flow would be
• The distance from pipe boundary, at which the point velocity is equal to average velocity in case of turbulent flow (when R is the radius of the pipe), is
• 2𝑔 148. The power transmitted through the pipe is maximum when head lost due to friction in the pipe is equal to
• In case of turbulent flow of a fluid through a circular tube (as compared to the case of laminar flow at the same flow rate) the maximum velocity is ....., shear stress at the wall is ....., and the pressure drop across a given length is ....., the correct words for the blanks are, respectively
• Flow in a pipe where average flow parameters are considered for analysis is an example of
• In flow through pipe bends the pressures on inner and out radii
• When a fluid flows through a tapering pipe at a constantly increasing rate, the flow is said to
• In laminar flow through a pipe, discharge varies
• For a laminar flow through a pipe the shear stress over a cross-section
• If the Reynolds number is less than 2000, the flow in a pipe is