A 30 cm x 20 cm horizontal venturimeter is placed to measure the flow rate of water. The pressure difference between the inlet and the throat is 2.52 m (of water). Find the flow rate of the venturimeter with a constant of 0.98.

Related MCQs

• A simple manometer containing mercury is used to measure pressure of oil (sp. gr. 0.8) flowing in a pipe as shown below. Mercury level in open tube is 150 mm higher than that on left limb. If height of oil in left limb is 90 mm, determine the pressure in terms of head of water in a pipe.
• A water tank contains 1.5 m deep water. Find pressure exerted by water per metre length of the tank.
• An inverted triangular plate is having base parallel to water surface with width 1.6 m and height 2.10 m. It is submerged in water in such a way that its base is 1.0 m below free surface. Find total pressure.
• A pipe line is 6 km long and having 20 cm diameter connect two reservoir 'A' and 'B'. The rate of discharge in the pipe is 30 lit/sec. Find out the difference in reservoir levels if friction factor f = 0.0008.
• When pressure is measured with reference to atmospheric pressure, but it is below atmospheric pressure, it is known as
• A circular plate 2.5 m diameter is immersed in water with its greatest and lowest depth below the free surface being 3.0m and 1.0m respectively. Find the position of centre of pressure
• Type of flow in which the density is constant for the fluid flow is known as
• A swimming pool having one side 10 m long, is filled with water up to 3.6 m depth. Find total pressure on the wall of the pool
• A rectangular plate of 2 m x 3 m height is immersed in water vertically with top edge parallel to and at depth of 3 m below free surface. Calculate total water pressure.
• From following which equation is used to measure negative pressure in u-tube manometer