A pipe line is 6 km long and having 20 cm diameter connect two reservoir 'A' and 'B'. The rate of discharge in the pipe is 30 lit/sec. Find out the difference in reservoir levels if friction factor f = 0.0008.

Related MCQs

• A compound pipe line is made up of pipe 45 cm dia. for 900 m, 37.5 cm for 450 m and 30 cm for 300 m is required to replace by a pipe of uniform diameter. Find diameter of equivalent pipe.
• The diameters of a pipe at the sections 1 and 2 are 10 cm and15 cm respectively. Find the discharge through the pipe if the velocity of water flowing through the pipe at section 1 is 5 m/s.
• Sometimes a compound pipe is required to be replaced by a pipe of uniform diameter and of the same length as that of the compound pipe is known as
• If the sum of pressure heads and velocity heads [(p/w) + (v2 /2g)] of a liquid flowing In a pipe be plotted as vertical ordinates on the centre line of the pipe. then the line joining the tops of such ordinates is known as
• If pressure heads (P/w) of a liquid Bowing in a pipe be plotted as vertical ordinates on the center line of the pipe, then the line joining the tops of such ordinates is known as
• A 30 cm x 20 cm horizontal venturimeter is placed to measure the flow rate of water. The pressure difference between the inlet and the throat is 2.52 m (of water). Find the flow rate of the venturimeter with a constant of 0.98.
• Water is flowing through a rectangular notch, having base width 500 mm and head over it is 160 mm. Find discharge of notch if Cd = 0.6.
• A swimming pool having one side 10 m long, is filled with water up to 3.6 m depth. Find total pressure on the wall of the pool
• A 12 m long weir is subdivided by four intermediate vertical posts each 0.6 m wide. If the weir is discharging under a head of 0.5 m, calculate discharge using Francis formula.
• The diameters of a pipe at the sections 1 and 2 are 10 cm and15 cm respectively. The velocity of water flowing through the pipe at section 1 is 5 m/s. Determine the velocity at section 2.