In a single phase full wave rectifier, during blocking state the peak inverse voltage of diode is

Related MCQs

• A single phase half wave controlled rectifier circuit has an R-L load. A freewheeling diode is also in the circuit. When freewheeling diode is conducting the SCR
• A single phase half wave rectifier is feeding a resistive load. When a = 0, dc output voltage is 127 V. When a = 30°, the dc output voltage will be about
• A single-phase voltage controller, using one SCR in anti parallel with a diode, feeds a load R and Vs = 230 V. For a firing angel of 90° for the SCR, the PMMC voltage connected across R would read
• A single phase fully controlled bridge rectifier is fed by a source having inductance. The output voltage during overlap period is
• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• In a 3 phase half wave rectifier, when firing angle is less than 90 degree, then the average dc output voltage becomes
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be
• In a single phase full wave regulator feeding a resistive load, the average current over one full cycle
• During forward blocking state of SCR, the voltage and current respectively are
• A full wave rectifier with resistive load produces