In integral cycle control the period of on-off control should be more than mechanical time constant of load.

Related MCQs

• If T is the time period for a chopper circuit and α is its duty cycle, then the chopping frequency is
• Find the expression for output voltage for a step-up chopper, assume linear variation of load current and α as the duty cycle.
• In a single phase full wave regulator feeding a resistive load, the average current over one full cycle
• In a single phase half-wave thyristor circuit with R load & Vs=Vm sinωt, the maximum value of the load current can be given by
• A single-phase full bridge inverter can operate in load-commutation mode in case load consists of:
• A 3 phase bridge inverter is fed by 400 V battery. The load is star connected and has a resistance of 10 Ω per phase. The peak value of load current is
• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• A 3 phase semiconverter when supplying a certain load has a rectification efficiency of 0.6 and transformer utilisation factor of 0.35. When a 3 phase full converter is supplying the same load
• During the commutation period in 3 phase converter, overlap time is
• A thyristor has a turn on time of 6 μs. If the anode circuit is inductive, the turn on time will be