A semiconverter feeding an RLE load operates in

Related MCQs

• In a full wave converter (M - 2 connection) feeding an RLE load, the peak thyristor current is 15 A. For fully controlled bridge circuit and same load current, the peak thyristor current will be
• A 3 phase semiconverter when supplying a certain load has a rectification efficiency of 0.6 and transformer utilisation factor of 0.35. When a 3 phase full converter is supplying the same load
• In a 3 phase semiconverter, the firing frequency is
• In a 3 phase semiconverter, the freewheeling diode comes into operation only if firing angle
• In a 3 phase full wave regulator feeding a star connected resistance load the input voltage is 400 V line to line. The firing angle is 160°. The line to line output voltage would be
• A single phase half wave converter is feeding a resistive load. Just before triggering, the voltage across thyristor is
• In a 3 phase full wave regulator feeding resistance load connected in star, the possible range of firing angle a is
• A single phase half wave rectifier is feeding a resistive load. When a = 0, dc output voltage is 127 V. When a = 30°, the dc output voltage will be about
• In a fully controlled bridge converter feeding a resistive load the waveshapes of output voltage and output current
• In a single phase full wave regulator feeding a resistive load, the average current over one full cycle