Wing rails are provided

Related MCQs

• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• If the stock rails are B.H. rails, the type of switch generally provided, is
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• To avoid the damage of nose of crossing, the wing rails are ramped so that nose of crossing remains at a lower level by
• On a straight railway track, absolute levels at point A on two rails are 100.550 m and 100.530 m and the absolute levels at point B 100 m apart are 100.585 m and 100.515 m respectively, the value of twist of rails per metre run, is
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• Study the following statements regarding creep. (i) Creep is greater on curves than on tangent railway track, (ii) Creep in new rails is more than that in old rails, (iii) Creep is more on steep gradients than on level track. The correct answer is
• On either side of the centre line of rails, a cant of 1 in 20 in the sleeper is provided for a distance of
• Bull headed rails are generally provided on