The diameter of main bars in R.C.C. columns, shall not be less than

Related MCQs

• The diameter of transverse reinforcement of columns should be equal to one-fourth of the diameter of the main steel rods but not less than
• If the diameter of longitudinal bars of a square column is 16 mm, the diameter of lateral ties should not be less than
• The diameter of longitudinal bars of a column should never be less than
• If the diameter of the main reinforcement in a slab is 16 mm, the concrete cover to main bars is
• If the size of a column is reduced above the floor, the main bars of the columns, are
• Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than
• The length of lap in tension reinforcement should not be less than the bar diameter × (actual tension / four times the permissible average bond stress) if it is more than
• Top bars are extended to the projecting parts of the combined footing of two columns Ldistance apart for a distance of
• An R.C.C. column of 30 cm diameter is reinforced with 6 bars 12 mm placed symmetrically along the circumference. If it carries a load of 40, 000 kg axially, the stress is
• The minimum thickness of the cover at the end of a reinforcing bar should not be less than twice the diameter of the bar subject to a minimum of