The fixed support in a real beam becomes in the conjugate beam a

Related MCQs

• Consider the following statements: Sinking of an intermediate support of a continuous beam 1. Reduces the negative moment at support. 2. Increases the negative moment at support. 3. Reduces the positive moment at support. 4. Increases the positive moment at the centre of span. Of these statements
• Bending moment at any section in a conjugate beam gives in the actual beam
• There are two beams of equal length L and a load P is acting on centre of both beams. One of them is simply supported at both ends while the other one is fixed at both ends. Deflection of centre of simply supported beam will be                      times that of defection of centre of fixed beam.
• A fixed beam of the uniform section is carrying a point load at the centre, if the moment of inertia of the middle half portion is reduced to half its previous value, then the fixed end moments will              
• The maximum negative bending moment in fixed beam carrying udl occurs at
• While using three moments equation, a fixed end of a continuous beam is replaced by an additional span of
• A simply supported beam deflects by 5 mm when it is subjected to a concentrated load of 10 kN at its centre. What will be deflection in a 1/10 model of the beam if the model is subjected to a 1 kN load at its centre?
• What will be the support reaction at point B?
• If support B settles by 1mm downward, what is direction of rotation at point A?
• If support A settles by 1mm downward, what is direction of rotation at point A?