The adjustment of rails is usually needed when creep exceeds

Related MCQs

• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• On a single line track, 10 goods trains loaded with iron ore run from A to B and empty wagons return from B to A daily. Amount of creep of the rails will be
• Anti-creep anchors are fixed to rails by
• If the stock rails are B.H. rails, the type of switch generally provided, is
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To reduce the wearing of rails, the rails are placed at an
• Creep is the
• Anti-creep bearing plates are provided on