The distance between the running edge of the stock and switch rails at the switch heel, is called

Related MCQs

• Heel divergency, the distance between the running faces of stock rail and gauge face of tongue rail, as recommended for Indian B.G. tracks, is
• If the stock rails are B.H. rails, the type of switch generally provided, is
• Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called
• A kink is made in stock rails, ahead of the toe of switch at a distance of
• The distance between the running face of the stock rail and the toe of the tongue rail, is known as
• If absolute levels of rails at the consecutive axles A, B, and C separated by 1.8 metres are 100.505 m, 100.530 m, and 100.525 m respectively, the unevenness of rails, is
• To prevent creep in rails, the steel sleepers are fixed with rails by clips, bolts and
• Check rails are provided on inner side of inner rails if sharpness of a B.G. curve, is more than
• To reduce the wearing of rails, the rails are placed at an
• The spread between the point and splice rails at a distance of 4.25 m is 50 cm. The size of the crossing is