When a shaft is subjected to a twisting moment, every cross-section of the shaft will be under

Related MCQs

• A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to
• Two shafts of the same material are subjected to the same torque. If the first shaft is of solid circular section and the second shaft is of hollow section whose internal diameter is 2/3 of the outside diameter, the ratio of weights of hollow shaft to solid shaft would be
• For the two shafts connected in parallel and sub-jected to twisting moment, the angle of twist of each shaft will be same.
• A twisting couple in a shaft induces in the shaft
• The bending moment diagram for a cantilever beam subjected to bending moment at the end of the beam would be
• Slenderness ratio of a 5 m long column hinged at both ends and having a circular crosssection with diameter 160 mm is
• When a shaft is subjected to torsion, the shear stress induced in the shaft varies from
• Two steel shaft each of length L and outside diameter D are subjected to uniform torsion. The first shaft is solid while the second one is hollow with inside diameter D/2. The ratio of the strain energies that these two shafts can absorb without exceeding a maximum allowable shear stress, would be
• Two shafts 'A' and 'B' have the same material. The shaft 'A' is solid of diameter 100 mm. The shaft 'B' is hollow with outer diameter 100 mm and inner diameter 50 mm. The torque transmitted by shaft 'B' is
• Two shafts 'A' and 'B' transmit the same power. The speed of shaft 'A' is 250 r.p.m. and that of shaft 'B' is 300 r.p.m. The shaft 'B' has the greater diameter.