In the following question, match each of the items A, B and C on the left with an approximation item on the right
A. Shift register can be used 1. for code conversion
B. A multiplexer can be used 2. to generate memory slipto select
C. A decoder can be used 3. for parallel to serial conversion
4. as many to one switch
5. for analog to digital conversion

Related MCQs

• Match List I with List II and select the correct answer form the codes given below the list List I A. A shift register can be B. A multiplexer C. A decoder can List II 1.for parallel to serial conversion 2.to generate memory can be used chip select 3.for parallel to serial conversion CODES: A B C
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• A 8-bit serial in / parallel out shift register contains the value “8”,           clock signal(s) will be required to shift the value completely out of the register.
• A bidirectional 4-bit shift register is storing the nibble 1110. Its input is LOW. The nibble 0111 is waiting to be entered on the serial data-input line. After two clock pulses, the shift register is storing .
• Assume that a 4-bit serial in/serial out shift register is initially clear. We wish to store the nibble 1100. What will be the 4-bit pattern after the second clock pulse? (Right-most bit first.)
• When a large number of analog signals are to be converted an analog multiplexer is used. In this case most suitable A.D. converter will be
• In Q output of the last flip-flop of the shift register is connected to the data input of the first flip-flop of the shift register.
• In Q output of the last flip-flop of the shift register is connected to the data input of the first flip-flop of the shift register.
• A comparison between serial and parallel adder reveals that serial order
• The number of clock pulses needed to shift one byte of data from input to the output of a 4-bit shift register is