A V-belt designated as C 120 will have

Related MCQs

• A spherical metal vessel 120 cm diameter is subjected to an internal pressure of 15 kg/sq cm. If the permissible stress is 625 kg/sq cm and the efficiency of the riveted joints is 75%, the required thickness of the plate would be
• A fine series screws of major diameter 8 mm and pitch 1 mm is generally designated as
• A coarse scres of major diameter 6 mm is designated as
• A rolled steel flat designated as 50 ISF 8 means
• A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
• If two gears having 24 and 96 teeth mesh each other, they must have been cut
• A steel specified as St 50 will have a tensile strength of approximately
• In a gas turbine rotor a radial stress of 300 kg/sq cm tensile and 500 kg/sq cm tangential stress have been found at a point. The maximum shear stress at this point would be
• Non-metallic gears have
• M 10 secrews have a pitch of