A coarse scres of major diameter 6 mm is designated as

Related MCQs

• A fine series screws of major diameter 8 mm and pitch 1 mm is generally designated as
• The maximum efficiency of a scres jack provided with square threads and angle of friction 30? will be
• In a standard coarse thread bolt the stress concentration is maximum at
• If M 20 coarse pitch is 2.5 mm the mm the fine pitch for the size would be
• A V-belt designated as C 120 will have
• A rolled steel flat designated as 50 ISF 8 means
• A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be
• A thin cylinder contains fluid at a pressure of 30 kg kg/cm2, the internal diameter of the shell is 60 cm and the tensile stress in the material is to be limited to 900 kg/cm2. The shell must have a minimum wall thickness of
• Approximate horse power that can be transmitted by a shaft 60 mm diameter at 180 r.p.m. with permissible shear stress of 850 kg/cm2, would be
• The rivet diameter should be