Slenderness ratio of the lacing bar for compression member should not exceed

Related MCQs

• The compression formula is valid upto the slenderness ratio of
• According to IS 800, the lacing bars should resist a transverse shear equal to
• Rinkine-Gordon formula for buckling load is adopted for columns having slenderness ratio between
• Rankine formula is valid upto slenderness ratio of
• If a machine member is loaded in such a way that the three principal stresses at a point are 600 kg/cm2 tension, 800 kg/cm2 compression and zero. The maximum shear stress at the point will be
• The trunions of a mixing machine have an effective length of 30 cm and the weight coming on each trunion is 1250 kg. If the fibre stress is not to exceed 350 kg/sq-cm the diameter of the trunions should be
• A unknown weight falls through 1 cm on a collar rigidly attached to the lower end of a vartical bar 3 cm long and 6 cm2 in section. If the maximum instantaneous extension is 2 mm the value of stress would be
• The stress concentration factor for flat bar in tension with a circular hole, is
• If machine number is loaded in such a way that the three principla stresses at a point are 600 kg/cm2 compression. 800 kg/cm2 tension and zero. The maximum shear stress at the point will be
• The shape or form factor is introduced in the design of compression members to represent the effect of