If the threads on a bolt are right hand the threads on nut will be

Related MCQs

• While designing for screw threads care should be taken to provide adequate length of engagement for the screw and nut threads so as to prevent failure of threads in
• If the shearing stress in a nut is equal to half the tensile stress in a bolt then the length of nut should be equal to
• A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be
• When a nut is tightened by placing a washer below it, the bolt will be subjected to
• When a nut is tightened by placing a washer under it, the bolt tends to fall in
• When the bolt is subjected to shock loading the resilience of the bolt should be considered in order to prevent breakege at
• A motor weighing 2000 kg is to be lifted by wrought iron eye bolt, screwed into the frame. Clioose-single bolt out of the following
• The pitch of threads on a lock-nut is
• If screw threads are to be used in a situation involving high stresses in one direction only, the types of threads suitable for this would be
• The clamping nut of the turn buckle has