In case of rolled steel beams, the chear force is resisted by

Related MCQs

• The ratio of the plastic moment capacity to the yield moment capacity of a rolled steel beam section is about
• A rolled steel flat designated as 50 ISF 8 means
• A simple supported steel beam when loaded with a force of 100 kg at A is found to deflect 10 mm at B. What force at B would cause a deflection of 2.5 mm at A
• In case of biaxial stress system when a member is subjected to tensile stresses in two perpendicular directions the maximum shear stress in case of mild steel occurs on a plane inclined at
• The shape factor of standard rolled beam section varies in the range
• Web crippling in beams generally occurs at points where
• Beams composed of more than one material, regidly connected so as to behave as one piece are known as
• A block weighing 1000 kg rests on a horizontal surface. The coefficient of friction is 0.3 (both static and kinetic). What frictional force will be developed if the force applied to the block in the direction parallel to the horizontal surface is 40 kg
• In the case of a cantilever, irrespective of the type, loading of the maximum bending moment and maximum shear force occur at
• A foundation bolt with a circular end is secured to the floor by means of a steel cotter. If the pull on the bolt is 14000 kg, the diameter of the bolt should be