A single ply leather belt running at a belt velocity of 300 ft/min is likely to transmit per inch of width

Related MCQs

• For maximum horse power transmission in belt drives the velocity of belt left such that the ration tight side driving tension/centrifugal tension is
• When it is desired to transmit a high velocity ratio in a limited space, the device used is
• In V-belt drive the belt touches
• A circulating water pump of a condenser is of the centrifugal type and directly connected to a three phase induction motor running at 900 rpm. The pump delivers 30,000 litres per minute against the dynamic head of 10 m. The horse power of the motor required to drive the pump would be
• The uniform rate of descent is maintained by a brake on the drum which applies the necessary torque of 300 kg-m what additional brake torque is required to bring the system to rest in 0.50 second?
• In a gas turbine rotor a radial stress of 300 kg/sq cm tensile and 500 kg/sq cm tangential stress have been found at a point. The maximum shear stress at this point would be
• For butt welding of two plates, each of which is 300 cm thick, the best process would be
• In a horizontal flat belt drive for power transmission it is customary to use
• In a Vee belt the angle between the sides is
• A V-belt having B section is generally used when the power to be transmitted is in the range