The slenderness ratio of vertical comumn of square cross-section of 2.5 cm sides and 600 cm length is

Related MCQs

• Slenderness ratio of a 5 m long column hinged at both ends and having a circular crosssection with diameter 160 mm is
• Of the two prismatic beams of same material, length and flexural strength, one is circular and other is square in cross-section. The ratio of weights of circular and square beams is
• A strip of steel (E = 200 GPa, 0.25) has a length of 1 m, width of 200 mm and thickness of 10 mm. A line of length 1 m is drawn parallel to its length on one of its side surfaces. When the strip is subjected to an axial tensile force of 100 kN, the length of the line will be                  mm.
• A beam of overall length 1 with equal overhangs on both sides carries a uniformly distributed load over the entire length. To have numerically equal bending moments at centre of the beam and at supports, the distance between the supports should be
• The slenderness ratio is the ratio of
• A beam of overall length / rests on two simple supports with equal overhangs on both sides. Two equal loads act at the free ends. If the deflection at the centre of the beam is the same as at either end, then the length of either overhang is
• Three pieces of wood having 3.75 cm x 3.75 cm square cross-sections are glued together and to the foundation. If the horizontal force P = 600 kg is applie3d to the central piece, the average shearing stress in each of the glued joints would be
• The tensile force at a distance y from support in a vertical hanging bar of length L whch carries a load P at the bottom is equal to---- where w = weight per unit length
• Euler's formula for a mild steel long column hinged at both ends is not valid for slenderness ratio
• Rankine's formula for column is valid when slenderness ratio