Find the voltage drop developed across a D’ Arsonval meter movement having an internal resistance of 1 kΩ and a full deflection current of 150uA.

Related MCQs

• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• To determine the polarity of the voltage drop across a resistor, it is necessary to know
• The total decibel voltage gain of two cascaded voltage amplifier where individual voltage gains are 10 and 100 is
• Consider a zener diode with a slope resistance of 10 Ω in series with a 90 Ω resistor fed from a dc supply containing a ripple voltage of 20mV peak-to-peak. Compute for the ripple voltage in load
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• If resistance across LM in Fig. 2.30 is 15 ohms, the value of R is
• The ac base voltage of an emitter follower is across the
• The output voltage of an emitter follower is across the
• "Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with
• Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with