Consider a zener diode with a slope resistance of 10 Ω in series with a 90 Ω resistor fed from a dc supply containing a ripple voltage of 20mV peak-to-peak. Compute for the ripple voltage in load

Related MCQs

• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• What is the maximum efficiency of a class A circuit with a direct or series-fed load connection?
• "Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with
• Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with
• To determine the polarity of the voltage drop across a resistor, it is necessary to know
• What transformer turns ratio is required to match an 8-speaker load so that the effective load resistance seen at the primary is 12.8 k?
• When a transistor amplifier feeds a load of low resistance, its voltage gain will be
• Calculate the efficiency of a class B amplifier for a supply voltage of VCC = 20 V with peak output voltage of VL(p) = 18 V. Assume RL = 16 Ω.
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• The total decibel voltage gain of two cascaded voltage amplifier where individual voltage gains are 10 and 100 is