The complementary Darlington-connected transistor for a class B amplifier provides output current and output resistance.

Related MCQs

• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• A class C amplifier has a tank circuit in the output. The amplifier is conducting only 28°. The output voltage is
• When a transistor amplifier feeds a load of low resistance, its voltage gain will be
• Class B operation is provided when the dc bias leaves the transistor biased just off, the transistor turning on when the ac signal is applied.
• A class A power amplifier uses transistor(s).
• The current in any branch of a transistor amplifier that is operating is
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• The output power of a transistor amplifier is more than the input power due to additional power supplied by
• A complementary-symmetry amplifier has
• A silicon power transistor is operated with a heat sink (θSA = 1.5ºC/W). The transistor, rated at 150 W (25ºC), has θJC = 0.5º C/W, and the mounting insulation has θCS = 0.6 ºC/W. What is the maximum power that can be dissipated if the ambient temperature is 50ºC and TJmax = 200 ºC?