When a transistor amplifier feeds a load of low resistance, its voltage gain will be

Related MCQs

• An amplifier without feedback has a voltage gain of 50, input resistance is 1 KΩ & Output resistance of 2.5KΩ.The input resistance of the current-shunt negative feedback amplifier using the above amplifier with a feedback factor of 0.2 is
• A transistor amplifier has a voltage gain of 100. If the input voltage is 75 mV, the output voltage is:
• A common-emitter amplifier has voltage gain, current gain, power gain, and input impedance.
• A class A amplifier has a voltage gain of 30 and a current gain of What is the power gain?
• The total decibel voltage gain of two cascaded voltage amplifier where individual voltage gains are 10 and 100 is
• For any inverting amplifier, the impedance capacitance will be                  by a Miller effect capacitance sensitive to the gain of the amplifier and the interelectrode capacitance.
• The complementary Darlington-connected transistor for a class B amplifier provides output current and output resistance.
• A class C amplifier has a tank circuit in the output. The amplifier is conducting only 28°. The output voltage is
• Consider a zener diode with a slope resistance of 10 Ω in series with a 90 Ω resistor fed from a dc supply containing a ripple voltage of 20mV peak-to-peak. Compute for the ripple voltage in load
• "Maximum power output is obtained from a network when the load resistance is equal to the output resistance of the network as seen from the terminals of the load". The above statement is associated with