Maximum shear stress in transverse fillet weld of leg h and length l is

Related MCQs

• A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal.
• Calculate minimum wall thickness given a cylindrical prestressed water tank of internal diameter 30m over a depth of 7.5m and the permissible compressive stress at transfer is 13n/mm2 and the maximum compressive stress under working pressure is 1n/mm2 and the loss ratio is 0.75?
• Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm². The diameter of shaft and width of key can be taken as 40mm and 10mm respectively.
• Calculate the spacing of 5mm wires having a loss ratio of 0.075, compressive stress is 10.75n/mm2, 5mm diameter wires stress is 1000n/mm2, 12 wires of 8mm diameter are stressed to 1200n/mm2(Nd = 840n/mm2)?
• Calculate circumferential prestress of a cylindrical prestressed concrete water tank given that the thickness is 12mm, loss ratio is 0.75, the maximum stress under working pressure is 1n/mm2(Nd value is 720)?
• At high shear locations in the girder web, principal plane will be              to longitudinal axis of member
• Calculate vertical prestressing force if wires of 5mm diameter with an initial stress of 1000n/mm2 are available for circumferential winding and Freyssinet cables made up of 12 wires of 8mm diameter stressed to 1200n/mm2 are to be used for vertical prestressing?
• As soon as sufficient length of premix has been laid, rolling should be started with 2 to 4 tonne roller.
• Calculate the maximum vertical moment due to prestress if given self weight moment is 16.5kn/m, thickness is 0.115m and loss ratio is 0.0075?
• What will be the maximum superrelevation in hills on Major District roads?