Calculate minimum wall thickness given a cylindrical prestressed water tank of internal diameter 30m over a depth of 7.5m and the permissible compressive stress at transfer is 13n/mm2 and the maximum compressive stress under working pressure is 1n/mm2 and the loss ratio is 0.75?

Related MCQs

• Calculate circumferential prestress of a cylindrical prestressed concrete water tank given that the thickness is 12mm, loss ratio is 0.75, the maximum stress under working pressure is 1n/mm2(Nd value is 720)?
• Calculate the spacing of 5mm wires having a loss ratio of 0.075, compressive stress is 10.75n/mm2, 5mm diameter wires stress is 1000n/mm2, 12 wires of 8mm diameter are stressed to 1200n/mm2(Nd = 840n/mm2)?
• Calculate the maximum vertical moment due to prestress if given self weight moment is 16.5kn/m, thickness is 0.115m and loss ratio is 0.0075?
• Calculate vertical prestressing force if wires of 5mm diameter with an initial stress of 1000n/mm2 are available for circumferential winding and Freyssinet cables made up of 12 wires of 8mm diameter stressed to 1200n/mm2 are to be used for vertical prestressing?
• If the sand filled behind the retaining wall with saturated water with water, then the possible lateral pressure is                      
• Members used to carry wall loads over wall openings are called
• Prestressed concrete although it is water tight, it is not                      
• In the fixed base joint the junction is between the tank wall and                      
• The proportioning of tendons in design of prestressed concrete simple flat slab between the column and middle strips may be based on                      
• The prestressed concrete slab systems are ideally suited for