As soon as sufficient length of premix has been laid, rolling should be started with 2 to 4 tonne roller.

Related MCQs

• A force 2P is acting on the double transverse fillet weld. Leg of weld is h and length l. Determine the shear stress in a plane inclined at θ with horizontal.
• Maximum shear stress in transverse fillet weld of leg h and length l is
• Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm². The diameter of shaft and width of key can be taken as 40mm and 10mm respectively.
• Prestressed concrete tanks have been widely used for the storage of                      
• If subgrade is soft or weak, a thick sub- base of cheap and inferior materials well compacted should be used.
• The diameter of longitudinal bars of a column should never be less than?
• Live load for roof truss should not be less than
• In a lap joint, at least                      bolts should be provided in a line.
• The metal linear concept in prestressed tanks has proved to be success in case of