These are important roads within a district connecting areas of production with markets and connecting them with the State Highways & National Highways and are maintained by the State PWD?

Related MCQs

• What will be the maximum superrelevation in hills on Major District roads?
• What will be the ruling gradient in hills on “Other district roads”?
• What will be the width of metalled surface single lane on Major District road?
• An                    culvert is normally a low profile culvert. It allows them to be installed without disturbing the causeway as it will span over the entire drainage width.
• What will be the design load for bridges and culverts on National Highway?
• What will be the minimum visibility at vertical curves on National Highway?
• Which authority is responsible for national highway?
• The precast prestressed hollow core slabs, with or without topping is an important
• Determine the length of kennedy key required to transmit 1200N-m and allowable shear in the key is 40N/mm². The diameter of shaft and width of key can be taken as 40mm and 10mm respectively.
• Calculate minimum wall thickness given a cylindrical prestressed water tank of internal diameter 30m over a depth of 7.5m and the permissible compressive stress at transfer is 13n/mm2 and the maximum compressive stress under working pressure is 1n/mm2 and the loss ratio is 0.75?