In the fixed base joint the junction is between the tank wall and                      

Related MCQs

• When a sliding joint is made what is interposed at the junction of wall and base?
• Why is double cover butt joint preferred over single cover butt joint or lap joint?
• Calculate minimum wall thickness given a cylindrical prestressed water tank of internal diameter 30m over a depth of 7.5m and the permissible compressive stress at transfer is 13n/mm2 and the maximum compressive stress under working pressure is 1n/mm2 and the loss ratio is 0.75?
• Members used to carry wall loads over wall openings are called
• Calculate circumferential prestress of a cylindrical prestressed concrete water tank given that the thickness is 12mm, loss ratio is 0.75, the maximum stress under working pressure is 1n/mm2(Nd value is 720)?
• If subgrade is soft or weak, a thick sub- base of cheap and inferior materials well compacted should be used.
• The factor that is responsible for inclination of resultant pressure to the retaining wall is                      
• If the sand filled behind the retaining wall with saturated water with water, then the possible lateral pressure is                      
• What will be the coefficient of earth pressure at rest for a rigid retaining wall, If the backfill consists of cohesion less soil having φ = 26°?
• In a lap joint, at least                      bolts should be provided in a line.