A free standing brick wall 20 cm thick is subjected to a wind pressure of 75kg/m². The maximum height of wall from stability consideration is

Related MCQs

• If is the height of wall between centers of supports, then the effective height of wall where concrete floors have a bearing on wall irrespective of the direction of span will be
• A 200 mm thick wall made of modular bricks is 5 m long between cross walls and 3.8 m clear height between RCC slabs at top and bottom. The slenderness ratio of the wall is
• Direct load carrying capacity of a brick masonry wall standing freely as against when it supports RC slab will be
• For strengthening a 50 m long and 5 m high straight compound wall built in brick work, which one of the following would be most suitable?
• The bending stress in a wall or column subjected to effective vertical load need not be considered, if the eccentricity ratio is
• If the eccentricity ratio is more than 1/24, then increase in the permissible stress in the design of wall subjected to eccentric loading as per code is
• The timber floor not spanning on the masonry wall but properly anchored to the wall gives
• If the ratio of center to center spacing of intersecting walls to actual thickness of intersecting wall is more than 20, then the stiffening coefficient for wall proper will be
• Water retentivity for brick masonry should not be less than
• The basic stress in masonry units having height to width ratio of 1.5 may be increased by a factor of