Working shear stress on the gross area of a rivet as recommended by Indian Standards, is

Related MCQs

• Working shear stress on the gross area of a rivet as recommended by Indian Standards, is
• The distance measured along one rivet line from the centre of a rivet to the centre of adjoining rivet on an adjacent parallel rivet line, is called
• The distance measured along one rivet line from the centre of a rivet to the centre of adjoining rivet on an adjacent parallel rivet line, is called
• When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which moment in any rivet.)
• Diameter of a rivet hole is made larger than the diameter of the rivet by
• If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be
• If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin's formula will be
• If fbt and fc are the co-existent bending tensile stress and shear stress in a member, the equivalent stress fc is
• In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is
• The gross diameter of a rivet is the diameter of