The equivalent axial load may be defined as the load which produces a stress equal to

Related MCQs

• The equivalent axial tensile load Pe, which produces an average axial tensile stress in the section equivalent to the combined stress due to axial tension P and bending M, at the extreme fibre of the section, is given by (where Z is the section modulus of the section).
• As per IS: 800, in the plastic design, which of the following pairs are correctly matched? Working Loads Load factor (i) Dead load 1.7 (ii) Dead Load + imposed load 1.7 (iii) Dead load + load due to wind or 1.3 seismic forces (iv) Dead load + imposed load + load 1.7 due to wind or seismic forces Of these statements
• On eccentrically loaded columns, the equivalent axial load may be obtained by
• If fbt and fc are the co-existent bending tensile stress and shear stress in a member, the equivalent stress fc is
• A 20 mm dia steel bar which is subjected to an axial tension of 2300 kg/cm2 produces a strain of cm. If Young's modulus of steel is 2.1 × 106kg/cm2, the bar is
• For determination of allowable stress in axial compression, Indian Standard Institution has adopted
• The allowable stress in axial tension for rolled I-sections and channels, is taken as
• The allowable stress in axial tension is generally kept less if thickness of the member is more than
• For determination of allowable stress in axial compression, Indian Standard Institution has adopted
• An axial loaded column is supported on a slab base whose projection is 8 cm. If the intensity of pressure from concrete is 40 kg/cm2 and allowable bending stress in slab base is 1890 kg/cm2 , the thickness (t) of the slab base, is