McqMate
These multiple-choice questions (MCQs) are designed to enhance your knowledge and understanding in the following areas: Electronics and Telecommunication Engineering [ENTC] .
| 351. |
The phenomenon occurring when the electron and photon population within the structure comes into equilibrium is known as |
| A. | auger recombination |
| B. | inter-valence band absorption |
| C. | carrier leakage |
| D. | relaxation oscillations |
| Answer» D. relaxation oscillations | |
| 352. |
When a current pulse reaches a laser having parasitic capacitance after the initial delay time, that pulse will |
| A. | have no effect |
| B. | will get vanished |
| C. | becomes narrower |
| D. | gets broader |
| Answer» D. gets broader | |
| 353. |
Reducing delay time and ____________ are of high importance for lasers. |
| A. | auger recombination |
| B. | inter-valence band absorption |
| C. | carrier leakage effects |
| D. | relaxation oscillations |
| Answer» D. relaxation oscillations | |
| 354. |
Dynamic line-width broadening under the direct modulation of injection current is known as |
| A. | auger recombination |
| B. | inter-valence band absorption |
| C. | carrier leakage effects |
| D. | frequency chirping |
| Answer» D. frequency chirping | |
| 355. |
A particular characteristic or parameter that occurs during analog transmission of injection lasers is |
| A. | noise |
| B. | mode hopping |
| C. | carrier leakage effects |
| D. | frequency chirping |
| Answer» A. noise | |
| 356. |
Intensity of output from semiconductor injection lasers leading to optical intensity noise is due to |
| A. | fluctuations in amplitude |
| B. | mode hopping |
| C. | carrier leakage effects |
| D. | frequency chirping |
| Answer» A. fluctuations in amplitude | |
| 357. |
In multimode lasers the optical feedback from unnecessary external reflections affecting stability of frequency and intensity is |
| A. | remains unaffected |
| B. | increased gradually |
| C. | reduced |
| D. | gets totally vanished |
| Answer» C. reduced | |
| 358. |
Reduction in the number of modes in multimode fiber increases the mode partition noise. State whether the given statement is true or false. |
| A. | false |
| B. | true |
| Answer» A. false | |
| 359. |
The behavior of laser occurring when current is increased above threshold particularly is |
| A. | mode hopping |
| B. | auger recombination |
| C. | frequency chirping |
| D. | noise |
| Answer» A. mode hopping | |
| 360. |
____________________ lasers are presently the major laser source for optical fiber communications |
| A. | semiconductor |
| B. | non-semiconductor |
| C. | injection |
| D. | solid-state |
| Answer» C. injection | |
| 361. |
Which of the following is not a property of Nd: YAG laser that enables its use as an optical fiber communication source? |
| A. | single mode operation |
| B. | narrow line-width |
| C. | long lifetime |
| D. | semiconductors and integrated circuits |
| Answer» D. semiconductors and integrated circuits | |
| 362. |
In a three level system, the threshold power decreases inversely with the length of the fiber gain medium. State whether the given statement is true or false. |
| A. | true |
| B. | false |
| Answer» B. false | |
| 363. |
Which of the following co-dopant is not employed by neodymium and erbium doped silica fiber lasers? |
| A. | phosphorus pent oxide |
| B. | germania |
| C. | nitrogen |
| D. | alumina |
| Answer» C. nitrogen | |
| 364. |
_______________ fibers include addition of lead fluoride to the core glass in order to raise the relative refractive index. |
| A. | solid-state |
| B. | gaas |
| C. | semiconductor |
| D. | zblanp |
| Answer» D. zblanp | |
| 365. |
In Fabry-perot laser, the lower threshold is obtained by |
| A. | increasing the refractive index |
| B. | decreasing the refractive index |
| C. | reducing the slope efficiency |
| D. | increasing the slope efficiency |
| Answer» C. reducing the slope efficiency | |
| 366. |
Y3Al5 O12 Is a molecular formula for _____________ |
| A. | ytterbium aluminate |
| B. | yttrium oxide |
| C. | ytterbium oxy-aluminate |
| D. | yttrium-aluminum garnet |
| Answer» D. yttrium-aluminum garnet | |
| 367. |
Which of these factors are critical in affecting the system performance in the case of coherent optical fiber transmission? |
| A. | laser line-width and stability |
| B. | refractive index and index difference |
| C. | core cladding diameter |
| D. | frequency |
| Answer» A. laser line-width and stability | |
| 368. |
_______________ occurs as a result of the change in lasing frequency with gain |
| A. | frequency multiplication |
| B. | dispersion |
| C. | attenuation |
| D. | line-width broadening |
| Answer» D. line-width broadening | |
| 369. |
Laser cavity length can be extended by |
| A. | increasing the refractive index |
| B. | reducing frequency |
| C. | introduction of external feedback |
| D. | using grin-rod lenses |
| Answer» C. introduction of external feedback | |
| 370. |
What is the purpose of wavelength dispersive element is LEC lasers? |
| A. | wavelength selectivity |
| B. | reduction of line-width |
| C. | frequency multiplication |
| D. | avalanche multiplication |
| Answer» A. wavelength selectivity | |
| 371. |
An effective method to reduce the line-width is to make the cavity longer. State whether the following statement is true or false. |
| A. | true |
| B. | false |
| Answer» A. true | |
| 372. |
Which devices are used to modulate the external cavity in order to achieve the higher switching speeds? |
| A. | electromagnetic |
| B. | acousto-optic |
| C. | dispersive |
| D. | lead |
| Answer» B. acousto-optic | |
| 373. |
How many techniques are used to tune monolithic integrated devices (lasers)? |
| A. | five |
| B. | one |
| C. | two |
| D. | three |
| Answer» C. two | |
| 374. |
_________________ laser can be produced when a coupler section is introduced between the amplifier and phase sections of a structure |
| A. | sg-dbr |
| B. | gcsr |
| C. | y 4-shifted |
| D. | dsm |
| Answer» B. gcsr | |
| 375. |
The rare-earth-doped fiber lasers have spectral line-width in the range of _________________ |
| A. | 0.1 to 1 nm |
| B. | 1.2 to 1.5 nm |
| C. | 6 to 10 nm |
| D. | 2 to 2.3 nm |
| Answer» A. 0.1 to 1 nm | |
| 376. |
The lasing line-width of Fox-smith resonator is ____________________ |
| A. | less than 1 mhz |
| B. | 1 mhz |
| C. | 2 mhz |
| D. | greater than 3 mhz |
| Answer» A. less than 1 mhz | |
| 377. |
What is the widest tuning range obtained in optical fiber laser structure? |
| A. | 60 nm |
| B. | 80 nm |
| C. | more than 100 nm |
| D. | 100 nm |
| Answer» C. more than 100 nm | |
| 378. |
The mechanism which results from a refractive index change in the passive waveguide layer is called as |
| A. | absorption |
| B. | spontaneous emission |
| C. | monolithic inversion |
| D. | bragg wavelength control |
| Answer» D. bragg wavelength control | |
| 379. |
How many sections are included in a sampling grating distributed Bragg-reflector laser (SG-DBR)? |
| A. | four |
| B. | five |
| C. | three |
| D. | two |
| Answer» B. five | |
| 380. |
Fiber based lasers provide diffraction-limited power at higher levels than solid-state laser. State whether the given statement is true or false |
| A. | true |
| B. | false |
| Answer» A. true | |
| 381. |
The parameters having a major role in determining threshold current of efficiency of injection laser are: |
| A. | angle recombination and optical losses |
| B. | frequency chirping |
| C. | relaxation oscillation |
| D. | mode hopping |
| Answer» A. angle recombination and optical losses | |
| 382. |
Auger current is mostly ___________________ for material with band gap providing longer wavelength emission. |
| A. | unaffected |
| B. | lesser |
| C. | larger |
| D. | vanishes |
| Answer» C. larger | |
| 383. |
Injection lasers operating in smaller wavelengths are subjected to increased carrier losses. State whether the following statement is true or false? |
| A. | true |
| B. | false |
| Answer» B. false | |
| 384. |
Devices based on quaternary PbSnSeTe and their ternary compounds, emit at wavelength ? |
| A. | between 3-4 μm |
| B. | longer than 4 μm |
| C. | between 3.5 to 4.2 μm |
| D. | between 2 to 3 μm |
| Answer» B. longer than 4 μm | |
| 385. |
Replacing Sn with Eu, Cd or Ge in some _________________ the band gap. |
| A. | remove the band gap |
| B. | does not affect |
| C. | decreases |
| D. | increases |
| Answer» D. increases | |
| 386. |
Lasing obtained in __________ when 191 mW of pump light at a wavelength of 0.477 μm is launched into laser. |
| A. | ternary pbsnsete alloy laser |
| B. | quaternary pbsnsete alloy laser |
| C. | doped fluoro-zirconate fiber |
| D. | ternary pbeute alloy laser |
| Answer» C. doped fluoro-zirconate fiber | |
| 387. |
The thulium doped fiber laser when pumped with alexandrite laser output at 0.786 μm, the laser emits at |
| A. | 0.6 μm |
| B. | 0.8 μm |
| C. | 2.3 μm |
| D. | 1.2μm |
| Answer» C. 2.3 μm | |
| 388. |
The diode-cladding-pumped Erbium praseodymium-doped fluoride device operates at wavelength. |
| A. | around 3 μm |
| B. | 4 μm |
| C. | 2.6 μm |
| D. | 1.04 μm |
| Answer» A. around 3 μm | |
| 389. |
A technique based on inter-sub band transition is known as |
| A. | auger recombination |
| B. | frequency chirping |
| C. | inter-valence band absorption |
| D. | quantum cascading |
| Answer» D. quantum cascading | |
| 390. |
In a QC laser, a same electron can emit number of photons. State the given statement is true or false? |
| A. | true |
| B. | false |
| Answer» A. true | |
| 391. |
The phenomenon resulting in the electrons to jump from one state to another each time emitting of photon is known as : |
| A. | inter-valence band absorption |
| B. | mode hopping |
| C. | quantum cascading |
| D. | quantum confinement |
| Answer» D. quantum confinement | |
| 392. |
A QC laser is sometimes referred as: |
| A. | unipolar laser |
| B. | bipolar laser |
| C. | gain guided laser |
| D. | non semiconductor laser |
| Answer» A. unipolar laser | |
| 393. |
In QC lasers, it is possible to obtain different output signal wavelengths. This can be achieved by |
| A. | inter-valence band absorption |
| B. | mode hopping |
| C. | quantum cascading |
| D. | selecting layers of different thickness |
| Answer» D. selecting layers of different thickness | |
| 394. |
QC lasers ______________ the performance characteristics. |
| A. | have negligible effects |
| B. | does not affects |
| C. | improves |
| D. | degrades |
| Answer» C. improves | |
| 395. |
An MQW cascaded laser is more advantageous because of: |
| A. | mode hopping |
| B. | auger recombination |
| C. | control over layers of material |
| D. | properties of material |
| Answer» C. control over layers of material | |
| 396. |
The absence of _______________ in LEDs limits the internal quantum efficiency. |
| A. | proper semiconductor |
| B. | adequate power supply |
| C. | optical amplification through stimulated emission |
| D. | optical amplification through spontaneous emission |
| Answer» C. optical amplification through stimulated emission | |
| 397. |
The excess density of electrons Δnand holes Δpin an LED is |
| A. | equal |
| B. | Δpmore than Δn |
| C. | Δn more than Δp |
| D. | does not affects the led |
| Answer» A. equal | |
| 398. |
The hole concentration in extrinsic materials is _________ electron concentration. |
| A. | much greater than |
| B. | lesser than |
| C. | equal to |
| D. | negligible difference with |
| Answer» A. much greater than | |
| 399. |
In a junction diode, an equilibrium condition occurs when |
| A. | Δngreater than Δp |
| B. | Δnsmaller than Δp |
| C. | constant current flow |
| D. | optical amplification through stimulated emission |
| Answer» C. constant current flow | |
| 400. |
Determine the total carrier recombination lifetime of a double heterojunction LED where the radioactive and nonradioactive recombination lifetime of minority carriers in active region are 70 ns and 100 ns respectively. |
| A. | 41.17 ns |
| B. | 35 ns |
| C. | 40 ns |
| D. | 37.5 ns |
| Answer» A. 41.17 ns | |
Done Studing? Take A Test.
Great job completing your study session! Now it's time to put your knowledge to the test. Challenge yourself, see how much you've learned, and identify areas for improvement. Don’t worry, this is all part of the journey to mastery. Ready for the next step? Take a quiz to solidify what you've just studied.