![Mcqmate logo](https://mcqmate.com/images/logos/logo-black.png)
![Mcqmate logo](https://mcqmate.com/images/logos/logo-white.png)
McqMate
1. |
The idea of cache memory is based |
A. | . on the property of locality of reference |
B. | . on the heuristic 90-10 rule |
C. | . on the fact that references generally tend to cluster |
D. | . all of the above |
Answer» C. . on the fact that references generally tend to cluster |
2. |
Systems that do not have parallel processing capabilities are |
A. | . sisd |
B. | . mimd |
C. | . simd |
D. | . misd |
Answer» D. . misd |
3. |
Parallel programs: Which speedup could be achieved according to Amdahl´s law for infinite number of processors if 5% of a program is sequential and the remaining part is ideally parallel? |
A. | . 10 |
B. | . 20 |
C. | . 30 |
D. | . 40 |
Answer» B. . 20 |
4. |
In shared bus architecture, the required processor(s) to perform a bus cycle, for fetching data or instructions is |
A. | . one processor |
B. | . two processor |
C. | . multi-processor |
D. | . none of the above |
Answer» C. . multi-processor |
5. |
Alternative way of a snooping-based coherence protocol, is called a |
A. | . write invalidate protocol |
B. | . snooping protocol |
C. | . directory protocol |
D. | . write update protocol |
Answer» C. . directory protocol |
6. |
If no node having a copy of a cache block, this technique is known as |
A. | . cached |
B. | . un-cached |
C. | . shared data |
D. | . valid data |
Answer» D. . valid data |
7. |
All nodes in each dimension form a linear array, in the . |
A. | . star topology |
B. | . ring topology |
C. | . connect topology |
D. | . mesh topology |
Answer» D. . mesh topology |
8. |
tasks being performed in different stages : |
A. | . require different amount of time |
B. | . require about the same amount of time |
C. | . require different amount of time with time difference between any two tasks being same |
D. | . require different amount with time difference between any two tasks being different |
Answer» A. . require different amount of time |
9. |
The expression 'delayed load' is used in context of |
A. | . processor-printer communication |
B. | . memory-monitor communication |
C. | . pipelining |
D. | . none of the above |
Answer» C. . pipelining |
10. |
During the execution of the instructions, a copy of the instructions is placed in the . |
A. | . register |
B. | . ram |
C. | . system heap |
D. | . cache |
Answer» C. . system heap |
11. |
Producer consumer problem can be solved using |
A. | . semaphores |
B. | . event counters |
C. | . monitors |
D. | . all of the above |
Answer» C. . monitors |
12. |
A situation where several processes access and manipulate the same data concurrently and the outcome of the execution depends on the particular order in which access takes place is called: |
A. | . data consistency |
B. | . race condition |
C. | . aging |
D. | . starvation |
Answer» B. . race condition |
13. |
Which one of the following statements describes the properties achieved? |
A. | . mutual exclusion but not progress |
B. | . progress but not mutual exclusion |
C. | . neither mutual exclusion nor progress |
D. | . both mutual exclusion and progress |
Answer» A. . mutual exclusion but not progress |
14. |
All deadlocks involve conflicting needs for |
A. | . resources |
B. | . users |
C. | . computers |
D. | . programs |
Answer» A. . resources |
15. |
To avoid deadlock |
A. | . there must be a fixed number of resources to allocate |
B. | . resource allocation must be done only once |
C. | . all deadlocked processes must be aborted |
D. | . inversion technique can be used |
Answer» A. . there must be a fixed number of resources to allocate |
16. |
processes to solve the critical section problem. |
A. | . one |
B. | . two |
C. | . three |
D. | . four |
Answer» B. . two |
17. |
Spinlocks are intended to provide only. |
A. | . mutual exclusion |
B. | . bounded waiting |
C. | . aging |
D. | . progress |
Answer» B. . bounded waiting |
18. |
A semaphore is a shared integer variable . |
A. | . lightweight process |
B. | . that cannot drop below zero |
C. | . program counter |
D. | . stack space |
Answer» B. . that cannot drop below zero |
19. |
A critical section is a program segment . |
A. | . where shared resources are accessed |
B. | . single thread of execution |
C. | . improves concurrency in multi-core system |
D. | . lower resource consumption |
Answer» D. . lower resource consumption |
20. |
A counting semaphore was initialized to 10. Then 6 P (wait) operations and 4V (signal) operations were completed on this semaphore. The resulting value of the semaphore is |
A. | . 4 |
B. | . 6 |
C. | . 9 |
D. | . 8 |
Answer» D. . 8 |
21. |
How many times will process P0 print '0'? |
A. | . at least twice |
B. | . one |
C. | . three |
D. | . none of the above |
Answer» C. . three |
22. |
A system has 3 processes sharing 4 resources. If each process needs a maximum of 2 units, then |
A. | . better system utilization |
B. | . deadlock can never occur |
C. | . responsiveness |
D. | . faster execution |
Answer» C. . responsiveness |
23. |
code, resources or data in such a way that only one process has access to shared object at a time. |
A. | . readers_writer locks |
B. | . barriers |
C. | . semaphores |
D. | . mutual exclusion |
Answer» C. . semaphores |
24. |
is the ability of multiple processes to co-ordinate their activities by exchange of information. |
A. | . deadlock |
B. | . synchronization |
C. | . mutual exclusion |
D. | . cache |
Answer» A. . deadlock |
25. |
Paths that have an unbounded number of allowed nonminimal hops from packet sources, this situation is referred to as . |
A. | . livelock |
B. | . deadlock |
C. | . synchronization |
D. | . mutual exclusion |
Answer» C. . synchronization |
26. |
Let S and Q be two semaphores initialized to 1, where P0 and P1 processes the following statements wait(S);wait(Q); ---; signal(S);signal(Q) and wait(Q); wait(S);---;signal(Q);signal(S); respectively. The above situation depicts a . |
A. | . livelock |
B. | . critical section |
C. | . deadlock |
D. | . mutual exclusion |
Answer» C. . deadlock |
27. |
Which of the following conditions must be satisfied to solve the critical section problem? |
A. | . mutual exclusion |
B. | . progress |
C. | . bounded waiting |
D. | . all of the mentioned |
Answer» D. . all of the mentioned |
28. |
a process is allowed to enter its critical section . |
A. | . after a process has made a request to enter its critical section and before the request is granted |
B. | . when another process is in its critical section |
C. | . before a process has made a request to enter its critical section |
D. | . none of the mentioned |
Answer» A. . after a process has made a request to enter its critical section and before the request is granted |
29. |
processes to solve the critical section problem. |
A. | . one |
B. | . two |
C. | . three |
D. | . four |
Answer» B. . two |
30. |
What are Spinlocks? |
A. | cpu cycles wasting locks over critical sections of programs |
B. | locks that avoid time wastage in context switches |
C. | locks that work better on multiprocessor systems |
D. | all of the mentioned |
Answer» D. all of the mentioned |
31. |
What is the main disadvantage of spinlocks? |
A. | they are not sufficient for many process |
B. | they require busy waiting |
C. | they are unreliable sometimes |
D. | they are too complex for programmers |
Answer» B. they require busy waiting |
32. |
at any moment (the mutex being initialized to 1)? |
A. | 1 |
B. | 2 |
C. | 3 |
D. | none of the mentioned |
Answer» C. 3 |
33. |
Here, w1 and w2 have shared variables, which are initialized to false. Which one of the following statements is TRUE about the above construct? |
A. | it does not ensure mutual exclusion |
B. | it does not ensure bounded waiting |
C. | it requires that processes enter the critical section in strict alternation |
D. | it does not prevent deadlocks but ensures mutual exclusion |
Answer» D. it does not prevent deadlocks but ensures mutual exclusion |
34. |
The signal operation of the semaphore basically works on the basic system call. |
A. | continue() |
B. | wakeup() |
C. | getup() |
D. | start() |
Answer» B. wakeup() |
35. |
(not necessarily immediately)? |
A. | . #pragma omp section |
B. | . #pragma omp parallel |
C. | . none |
D. | . #pragma omp master |
Answer» A. . #pragma omp section |
36. |
When compiling an OpenMP program with gcc, what flag must be included? |
A. | . -fopenmp |
B. | . #pragma omp parallel |
C. | . –o hello |
D. | . ./openmp |
Answer» A. . -fopenmp |
37. |
program, i.e., each thread executes the same code. |
A. | . parallel |
B. | . section |
C. | . single |
D. | . master |
Answer» A. . parallel |
38. |
they would be in serial program. |
A. | . nowait |
B. | . ordered |
C. | . collapse |
D. | . for loops |
Answer» B. . ordered |
39. |
code of functions that are called (directly or indirectly) from within the parallel region. |
A. | . lexical extent |
B. | . static extent |
C. | . dynamic extent |
D. | . none of the above |
Answer» C. . dynamic extent |
40. |
The specifies that the iterations of the for loop should be executed in parallel by multiple threads. |
A. | . sections construct |
B. | . for pragma |
C. | . single construct |
D. | . parallel for construct |
Answer» B. . for pragma |
41. |
active in the parallel section region. |
A. | . omp_get_num_procs ( ) |
B. | . omp_get_num_threads ( ) |
C. | . omp_get_thread_num ( ) |
D. | . omp_set_num_threads ( ) |
Answer» B. . omp_get_num_threads ( ) |
42. |
The size of the initial chunksize . |
A. | . total_no_of_iterations / max_threads |
B. | . total_no_of_remaining_iterations / max_threads |
C. | . total_no_of_iterations / no_threads |
D. | . total_no_of_remaining_iterations / no_threads |
Answer» A. . total_no_of_iterations / max_threads |
43. |
parallel architectures affect parallelization? |
A. | . performance |
B. | . latency |
C. | . bandwidth |
D. | . accuracy |
Answer» C. . bandwidth |
44. |
global_count += 5; |
A. | . 4 instructions |
B. | . 3 instructions |
C. | . 5 instructions |
D. | . 2 instructions |
Answer» C. . 5 instructions |
45. |
generate log files of MPI calls. |
A. | mpicxx |
B. | mpilog |
C. | mpitrace |
D. | mpianim |
Answer» B. mpilog |
46. |
selectively screen messages. |
A. | dest |
B. | type |
C. | address |
D. | length |
Answer» B. type |
47. |
them in this case and returning the result to a single process. |
A. | mpi _ reduce |
B. | mpi_ bcast |
C. | mpi_ finalize |
D. | mpi_ comm size |
Answer» A. mpi _ reduce |
48. |
The easiest way to create communicators with new groups is with . |
A. | mpi_comm_rank |
B. | mpi_comm_create |
C. | mpi_comm_split |
D. | mpi_comm_group |
Answer» C. mpi_comm_split |
49. |
is an object that holds information about the received message, including, for example, it’s actually count. |
A. | buff |
B. | count |
C. | tag |
D. | status |
Answer» D. status |
50. |
The operation similarly computes an element-wise reduction of vectors, but this time leaves the result scattered among the processes. |
A. | reduce-scatter |
B. | reduce (to-one) |
C. | allreduce |
D. | none of the above |
Answer» A. reduce-scatter |
51. |
is applicable in ___________________. |
A. | . amdahl\s law |
B. | . gustafson-barsis\s law |
C. | . newton\s law |
D. | . pascal\s law |
Answer» A. . amdahl\s law |
52. |
programming. The issues related to synchronization include the followings, EXCEPT: |
A. | . deadlock |
B. | . livelock |
C. | . fairness |
D. | . correctness |
Answer» C. . fairness |
53. |
Interface (MPI)? |
A. | . a specification of a shared memory library |
B. | . mpi uses objects called communicators and groups to define which collection of processes may communicate with each other |
C. | . only communicators and not groups are accessible to the programmer only by a "handle" |
D. | . a communicator is an ordered set of processes |
Answer» C. . only communicators and not groups are accessible to the programmer only by a "handle" |
54. |
workload in the computation of the forces. |
A. | . cyclic distribution |
B. | . velocity of each particle |
C. | . universal gravitation |
D. | . gravitational constant |
Answer» B. . velocity of each particle |
55. |
parallelizing them using OpenMP. |
A. | . thread‘s rank |
B. | . function loopschedule |
C. | . pthreads |
D. | . loop variable |
Answer» D. . loop variable |
56. |
Each node of the tree has an , that is, the cost of the partial tour. |
A. | . euler‘s method |
B. | . associated cost |
C. | . three-dimensional problems |
D. | . fast function |
Answer» C. . three-dimensional problems |
57. |
could possibly lead to a least-cost solution. |
A. | . depth-first search |
B. | . foster‘s methodology |
C. | . reduced algorithm |
D. | . breadth first search |
Answer» C. . reduced algorithm |
58. |
user program and buffersize is its size in bytes. |
A. | . tour data |
B. | . node tasks |
C. | . actual computation |
D. | . buffer argument |
Answer» A. . tour data |
59. |
addition to the cost of the communication, the packing and unpacking is very . |
A. | . global least cost |
B. | . time- consuming |
C. | . expensive tours |
D. | . shared stack |
Answer» C. . expensive tours |
60. |
has in its stack. |
A. | . terminated |
B. | . send rejects |
C. | . receive rejects |
D. | . empty |
Answer» D. . empty |
61. |
takes the data in data to be packed and packs it into |
A. | . mpi unpack |
B. | . mpi_pack |
C. | . mpi_datatype |
D. | . mpi_comm |
Answer» C. . mpi_datatype |
Done Reading?